80L high and low temperature alternating test chamber
Source: website release time: November 2, 2018 16:40:00 reading: 1001
Asli 80L high and low temperature alternating test chamber The appearance and color of the parts are reasonable, which can meet the requirements of customers. It has a wide temperature control range. The high-precision programmable temperature controller made in Japan is adopted, 7 inch true color touch screen operation, Chinese / English LCD display, with 10m / 100M Ethernet interface, free operation software. Using imported refrigeration compressor, refrigeration adopts a new output control of cold end, compared with the traditional cold and hot balance, it greatly saves energy consumption and reduces the use cost of customers.
80L high and low temperature alternating test chamber The executive pole meets the standard:
GB / t2423.1-2008 test a: low temperature
GB / t2423.2-2008 test B: high temperature
GB / t10589-2008 technical conditions of low temperature test chamber
GB / t11158-2008 specification for high temperature test chamber
GB / t10592-2008 technical conditions
Gjb150.3a-2009 Part 3: high temperature test
Gjb150.4a-2009 Part 4: low temperature test
80L high and low temperature alternating test chamber Structure:
1. The cabinet of the test chamber is of integral structure, the refrigeration system is located at the lower part of the rear part of the box, and the control system is located at the upper part of the test box.
2. In the air duct interlayer at one end of the workroom, the heater, refrigeration evaporator, air blade and other devices are distributed; the left side of the test box is equipped with a Ф 50 cable hole, and the test box is a single door
3. The door of the box is equipped with an observation window, a frost proof device and a lamp that can be switched on and off. The observation window is made of multi-layer hollow toughened glass, and the inner side is bonded with conductive film for heating and defrosting.
4. The imported Philips lamp can effectively observe the test changes in the studio.
5. Double layer high temperature and aging resistant silicone rubber seal can effectively ensure the loss of temperature in the test chamber
80L high and low temperature alternating test chamber Control system:
Controller: Siemens PLC controller, Siemens color LCD touch screen
Precision range setting accuracy: temperature 0.1 ℃, indicating accuracy: temperature 0.1 ℃
Temperature sensor: platinum resistance PT100Ω/MV
Pressure sensor: electronic pressure transmitter
Heating system: system, Ni Cr alloy electric heating heater
Refrigeration system: French original Refrigeration mode of "Taikang" air cooled single stage / cascade compressor
Circulation system: temperature resistant low noise air conditioning motor . multi blade centrifugal fan
80L high and low temperature alternating test chamber texture of material:
Material of outer box: carbon steel plate . phosphating electrostatic spray treatment / SUS304 stainless steel mist line hairline treatment
Inner box material: SUS304 stainless steel mirror plate
Thermal insulation material: polyurethane rigid foam, superfine glass fiber cotton
Heat insulation of door frame: double layer high and low temperature aging silicone rubber door sealing strip
80L high and low temperature alternating test chamber Product photo:
Our company also has three comprehensive test box, impact test box, high and low temperature alternating humidity heat test box, etc. products are sold. Welcome to check, aisley It's all about the quality of the products and the service good Please feel free to buy your favorite products.
Manufacturer of high and low temperature alternating test box Price of high and low temperature alternating test box Ranking of high and low temperature alternating test chambers Principle of high and low temperature alternating test chamber
Maintenance of high and low temperature alternating test box Maintenance of high and low temperature alternating test chamber High and low temperature alternating test box brand High and low temperature alternating test box equipment